saw components data sheet l 9654 m
2 may 08, 2001 saw components l 9654 m 33,90 mhz and 38,90 mhz if filter for audio applications data sheet plastic package sip5k standard n l/l features n tv if audio filter with two channels n channel 1 with pass band for sound carriers at 40,40 mhz (l) and 39,75 mhz (l-nicam) n channel 2 with pass band for sound carriers at 32,40 mhz (l) and 33,05 mhz (l-nicam) terminals n tinned cufe alloy pin configuration 1 input 2 switching input 3 chip carrier - ground 4 output 5 output type ordering code marking and package according to packing according to l 9654 m B39389-L9654-M100 c61157-a1-a15 f61074-v8067-z000 maximum ratings operable temperature range t a C25/+65 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 12 v between any terminals ac voltage v pp 10 v between any terminals dimensions in mm, approx. weight 1,0 g
3 may 08, 2001 saw components l 9654 m 33,90 mhz and 38,90 mhz if filter for audio applications data sheet characteristics of channel 1 (switching pin 2 connected to ground) reference temperature: t a = 25 ?c terminating source impedance: z s = 50 w terminating load impedance: z l = 2 k w || 3 pf min. typ. max. insertion attenuation a reference level for the 40,40 mhz 17,4 18,9 20,4 db following data relative attenuation a rel 39,75 mhz C1,7 C0,7 0,3 db 38,40 mhz 36,0 56,0 db picture carrier 33,90 mhz 38,0 54,0 db adjacent picture carrier 41,90 mhz 32,0 37,0 db adjacent sound carrier 32,40 mhz 36,0 51,0 db lower sidelobe 25,00 ... 32,40 mhz 32,0 38,0 db upper sidelobe 41,90 ... 45,00 mhz 30,0 35,0 db group delay ripple (p-p) dt 50 ns impedance at 40,40 mhz input: z in = r in || c in 1,1 || 10,7 k w || pf output: z out = r out || c out 0,5 || 10,3 k w || pf temperature coefficient of frequency tc f C72 ppm/k
4 may 08, 2001 saw components l 9654 m 33,90 mhz and 38,90 mhz if filter for audio applications data sheet characteristics of channel 2 (switching pin 2 connected to pin 1) reference temperature: t a = 25 ?c terminating source impedance: z s = 50 w terminating load impedance: z l = 2 k w || 3 pf min. typ. max. insertion attenuation a reference level for the 32,40 mhz 16,5 18,0 19,5 db following data relative attenuation a rel 33,05 mhz C0,7 0,3 1,3 db 34,40 mhz 30,0 50,0 db picture carrier 38,90 mhz 40,0 55,0 db adjacent picture carrier 30,90 mhz 44,0 54,0 db adjacent sound carrier 40,40 mhz 35,0 46,0 db lower sidelobe 25,00 ... 30,90 mhz 32,0 38,0 db upper sidelobe 38,90 ... 45,00 mhz 32,0 38,0 db group delay ripple (p-p) dt 50 ns impedance at 32,40 mhz input: z in = r in || c in 1,4 || 15,4 k w || pf output: z out = r out || c out 0,6 || 14,1 k w || pf temperature coefficient of frequency tc f C72 ppm/k
5 may 08, 2001 saw components l 9654 m 33,90 mhz and 38,90 mhz if filter for audio applications data sheet frequency response of channel 1
6 may 08, 2001 saw components l 9654 m 33,90 mhz and 38,90 mhz if filter for audio applications data sheet frequency response of channel 2
7 may 08, 2001 saw components l 9654 m 33,90 mhz and 38,90 mhz if filter for audio applications data sheet published by epcos ag surface acoustic wave components division, saw ce mm pd p.o. box 80 17 09, d-81617 mnchen ? epcos ag 2001. all rights reserved. a s far as patents or other rights of third parties are concerned, liability is only assumed for compo- nents per se, not for applications, processes and circuits implemented within components or assemblies. t he information describes the type of component and shall not be considered as assured characteristics. t erms of delivery and rights to change design reserved. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
|
